Slope Top for Lockers
PencoPenco Products, Inc.
HomeAbout PencoCatalog DownloadsNewsContact PencoPenco Distributor Only
Penco Product Line
Vanguard Lockers Guardian Lockers Invincible II Lockers All-Welded Lockers ProTough Lockers Stadium Lockers Smart Lockers
Lockers LOCKERS
Vanguard, Guardian
Invincible II, All-Welded, Angle Iron,
ProTough, Stadium SmartLocker
Accessories
Shelving SHELVING
Clipper, RivetRite, Erectomatic,
Wide Span
Multi-Level Storage MULTI-LEVEL
STORAGE
Hi-Rise Shelving,
Mezzanines
Shelving PALLET RACK
Pallet Rack
Cantilever
Shop Furniture Shop
Furniture
Work Benches,
Shop Desk,
Service Carts,
Inventory Cart
Cabinets

Cabinets
E-Z Bilt,
L-Handle

   
Paint Finish Color Options
Lockers
Shelving, Pallet Rack, Shop Furniture, Cabinets
CAD Files

Elevation Drawings
Lockers PDF (Acrobat)
 Shelving and Pallet Rack Installation (PDF)

Assembly Instructions Assembly Instructions
Lockers, Shelving, Work Benches, Storage Cabinets
Specifications Specifications
Lockers, Shelving, Rack,
Storage Cabinets,
Shop Furniture
Slope Tops
Slope tops are often used instead of flat tops to prevent the accumulation of dust and debris, and to discourage the use of locker tops as storage areas. There are three different types of slope top construction: Unit Slope Tops, Slope Hoods, and Slope Top Kits. Each is explained below. 

Unit Slope Tops

Unit Slope Tops cover the width of one locker frame only. Lockers with Unit Slope Tops have sides with mitered top ends with a rise equal to 1/3 of the locker depth, plus longer backs that meet the rear edge of the slope top. Unit slope tops are used in place of the standard flat tops. Order the appropriate locker plus the proper slope top size. (Not for use on Invincible II or All Welded lockers, use Continuous Slope Top Hood listed below.)

 

Slope Top Kit

Designed to convert stock flat top lockers into slope top lockers in groups of 3 wide. Each Kit contains 3 tops, 3 backs and 4 ends. Also available for quick shipment in 028 Gray. (Not for use on Invincible II or All Welded lockers, use Continuous Slope Top Hood listed below.)

 

Continuous Slope Top Hood

Continuous slope hoods fit on top of flat top lockers. They can be used on new lockers, or on a retrofit basis. All hoods are furnished in 72" lengths and must be cut to length during installation. Intermediate splices, ends and rear supports (2 per hood) complete the installation, and must be ordered separately.

 





 

 
 

© 2007 Penco Products, Inc.
Main Office, 99 Brower Ave., PO Box 378, Oaks, PA 19456-0378
800-562-1000 Fax 610-666-7561
All rights reserved.