Pallet
Rack Beams
Penco has engineered its roll-formed
one piece beam to achieve the highest possible
strength-to-weight ratios in the most frequently
desired load ratings through the use of efficient
design and high strength steel.
Beams
are offered in different vertical profiles
and steel gauges. Beam step heights of 7/8" and 1-5/8" are
available for a wide variety of accessory use.
Both the overlapping seam and the beam end
connector are securely MIG welded for strength.
The face of the beam has an M-design recessed
configuration for added strength, protecting the locking key,
and to accept pressure sensitive labeling. Each beam is stamped
with an identifying letter referring to the load bearing capacity.
Beams are finished in 710 Safety Yellow baked enamel for high
visibility.
Pallet
Rack Frames
 Penco
Pallet Rack Upright Frames are available in
five different load carrying ranges. A letter
code stamped into the face of the post
indicates the frame type. Depths of 30", 36", 42", 48", 54" and
60" are standard, but other depths are available. Standard heights
range from 48" to 240" in 6" increments, but greater heights
can be achieved when splices are used.
Beam
heights adjust on 3" vertical centers,
and are independent on each side of the frame.
Beams of any type can be placed along the
full height of the post; there are no
dead spots on the post, even across a splice.
Various load rated frames can be combined
in a row of rack for maximum economy.
Penco Pallet Rack Upright Frames are furnished
completely fabricated, welded into rigid units. Standard finish
for upright frames is 028 Gray baked enamel.
We recommend that all upright frames be securely
anchored to the floor for safety. |
PLYWOOD
SUPPORTS: For supporting plywood or other wood decking.
Styles are available for 1/2" deck on 7/8" step beams
and 3/4" deck on 1-5/8" step beams.