Penco RivetRite Boltless Shelving consists of simple components that lock rigidly together to form exceptionally strong shelving units.

RivetRite offers the following to help solve your storage problems:

• It is Economical - your shelving dollar goes a long way
• Assembly is easy - no special tools required
• Uses Common Tee Posts between units to provide economical Add-ons
• Provides clear access from all sides - no braces to get in the way
• Shelves adjustable on 1-1/2" centers - allows you to custom design units to fit your load size
• Finished in attractive 723 Light Putty color - baked on for permanence
• A variety of beams to accommodate a wide range of loads - you buy the capacity you need  

Components

Choose from a wide selection of component sizes and capacities to fit the storage requirements.

ANGLE POST - 1-1/2" x 1-1/2" (Standard Duty): Used as upright post for standard RivetRite units.

ANGLE POST - 1-7/8" x 1-7/8" (Heavy Duty): When maximum capacity and stability are essential, the heavy duty angle post is the proper choice. Ideally suited for two level shelving, storage deck and high rise shelving applications.

TEE POST - 3" x 1-1/2" (Standard Duty): Included with standard duty add-on units to function as a common post between starter and adjoining units.

TEE POST - 3-3/4" x 1-7/8" (Heavy Duty): Used in the same way as the standard tee, when increased load capacities are required

SINGLE RIVET SHELF BEAM (Heavy Duty): Manufactured to provide maximum capacity with very little loss of usable vertical space between shelves.

DOUBLE RIVET ANGLE BEAM (Standard Duty): Used to establish unit stability and to provide shelf support on all four sides.

DOUBLE RIVET ANGLE BEAM (Heavy Duty): Provides stability and increased load capacity in the longer lengths.

DOUBLE RIVET CHANNEL BEAM: Designed to provide maximum left to right stability and higher capacity than standard or heavy duty beams. Cannot be used at floor level.

CENTER SUPPORT: Used with double rivet beams to provide front-to-rear support for shelf deck and provides added stability to beams.

DOUBLE RIVET ZEE STEP BEAMS: Reduced profile increases vertical clearance by 1-1/4" between shelf levels when used in place of Double Rivet Angle Beams. Protects decking edges. When used as the bottom shelf on Single Rivet Units clear space between the bottom and first shelf is increased by 1-1/4".

DECKING SUPPORT FOR ZEE STEP BEAM: Used with Zee Step Beams for front to back decking support.

• 48" to 96" wide beams
• Access to stored items from all sides
• Choice of beam capacity to meet your storage requirement
• Easy assembly without special tools
• Units available in 84" and 120" heights

Penco RivetRite bulky shelving is designed to provide an economical solution for the storage of retail, wholesale or industrial goods. Installation can be done without special tools in a minimum amount of time. All steel parts are finished in attractive 723 Light Putty baked enamel.

SINGLE RIVET HIGH DENSITY UNITS

Single Rivet high density shelving uses single rivet beams on intermediate levels, and double rivet beams at the top and bottom for rigidity. For units up to 48 " wide.

• High Density Shelf Beams provide maximum space between shelf levels
• Common tee posts between starter and add-on unit
• Shelf levels adjust on 1-1/2" centers
• Fast easy assembly
• Optional heavy duty single rivet shelf beams available for added capacity

Penco Single Rivet beam High Density shelving is designed to provide for maximum vertical clearance between shelves. Access to stored item from all sides is possible because side and back cross braces are not necessary for stability. Add-on units assemble quickly without special tools by using a common tee post between units. Finished in 723 Light Putty baked enamel.

Automotive Parts Units

TIRE STORAGE RACK: Penco RivetRite® Tire Racks provide for the neat organized storage of standard automobile or light truck tires. Specially designed beams with a 30° degree flange on the top securely cradle the tires. Available in Single-Row, (12" deep units with 9" Wall Ties) and Double-Row, (two 12" deep units separated by 18" Double Row Spacers). Unit depth shown includes wall ties/row spacers.

MUFFLER STORAGE: Uniform storage of various size mufflers is achieved through the use of RivetRite Muffler Storage Units. As with all RivetRite units, ease of assembly and access from all sides is standard. Add-on units utilize common Tee Posts between units. Particle Board must be ordered separately for each level.

HANGING TAILPIPE RACK: Designed specifically for the storage of automotive and light truck tailpipes. Assembles in minutes without special tools. Stored items are visible and easily accessible.