Penco has been building lockers for decades that last for decades,
and the Vanguard line is the embodiment of what it takes to
withstand
the daily use typically given to a locker.What you
see first is the baked enamel finish, which is applied over
a phosphatized
smooth steel surface.
There are 21 standard colors from
which to choose, with body parts painted to match the doors.
Single
and double tier lockers have multi-point latching that makes opening
and closing a door an effortless task. The patented die-cast Vanguard
handle pulls out with a simple motion for opening. When you are
ready to close the door, you may do so with one motion of one
hand, since the spring-loaded latch clips will secure the door
even while the door is locked, either with a built-in lock or
padlock.
Box locker
doors have a functional friction catch that permits the use of
built-in locks or padlocks. All latch hooks have noise-reducing
rubber bumpers.
The door frames
have mortise and tenon construction and are securely spot welded
for lifetime rigidity. Every door has a vertical flange which
creates a continuous door strike. All hinges are full loop, 5
-knuckle design, welded to the frame, and riveted to the door.
These features,
available across the broad range of models and sizes, make Vanguard
the first choice for many locker users.
Most Vanguard
lockers are available on a Quick Ship basis, unit-packaged
with flat tops and 6" legs in the 028 gray and 073 Champagne finish.
Contact your Penco representative for details.
The most
popular and widely used locker offers maximum space for full
hanging of clothing and other belongings. Each locker has a
convenient shelf for storage of books, hats or other small articles.
Lockers 18" deep or more come with a coat rod in addition
to coat hooks
Accommodates
twice as many people as single tier lockers in the same floor
space, while still providing enough room for light outer wear
and personal belongings.
Also known
as "box lockers" for thier compact dimensions, Penco
multiple tier lockers allow numerous users in the smallest amount
of floor space. They are available in 3, 4, 5 and 6 tier configurations.
These lockers are ideal for storage of athletic gear or employee
personal storage. Each compartment can be locked with padlocks
or built-in locks.
A space
saving model that has ample room for two people while occupying
about the same space as a single tier locker. These lockers
have the advantage of a full width book compartment doors. Coat
rods are included in lockers 18" deep or more.
These efficient
lockers are ideal for multiple user situations such as school
gymnasium locker rooms. The box compartments (18"w x 12"h)
are for permanent storage of athletic gear. When a user is present,
the large locker (18"w x 60"h) is used for street
clothes.
A dual locker
is a single tier locker with a vertical partition separating
the bottom into two compartments. It is ideally suited for situations
where street clothes and work clothes are to be kept apart.
It is generally used with lockers 15" or 18" wide
and 18" or 21" deep. Guardian and Invincible II lockers
can also be supplied as dual lockers.
The Executive
is a custom-outfitted 24" wide locker which offers such
optional personal amenities as multiple storage shelves, lockable
inner storage compartment, and combination comb and brush tray
with towel bar. Shown with double door construction.
It is especially
appropriate for country clubs. Other accessories available include
golf ball tray, acrylic mirror and name card holder.
A practical
storage unit where space is at a premium. Four private compartments
with a hanging area for 16 coats. When wall mounted, the floor
below is kept clear for easy cleaning (wall anchors are not
included). This locker can also be set on counters or cabinets
(without coat rod).
This individual
one high box locker provides storage for personal items and
features standard box locker construction with internal friction
catch. Actual overall height is 13-5/8".
Single Tier
or the lower openings of Double Tier lockers can be configured
to meet the requirements of physically challenged users. The
doors must be equipped with recessed handles. The locker bottom
must be a minimum of 9" from the floor.
Also, for
60" or 72" high Single Tier lockers, the hat shelf
must be positioned no higher than 48" from the floor.
