Quick Ship
Penco Exchange

Work benches

Work benches

Penco's Work Bench is a rugged platform for work of all types with a variety of work surface materials, accessories and fixed or adjustable height legs

Penco's Work Beaches define the classic work station. A rugged platform for work of all types. Standard units include a top, legs and stringer. Open work bench units are available with either fixed or adjustable height legs. Both leg types are punched for tops, stringers, shelves and floor anchoring.

Open Work Benches
Each Penco Work Bench model can be ordered with your choice from 4 types of top materials. The bench can be accessorized with drawers, electrical outlet strips, back & end stops, risers and a lower shelf.Open work bench units are available with either fixed or adjustable height legs. Both leg types are punched for tops, stringers, shelves and floor anchoring. Fixed height legs are designed for overall surface height of approximately 30" or 34". Adjustable height legs offer work surfaces from approximately 30" to 36" high, adjustable on 1" centers, plus knockouts for standard electrical outlets.

Work Bench Tops



STEEL TOP

Heavy gauge steel with no holes on work surface. Withstands hard shop use for years. Will not crack, splinter, gouge or absorb oil. Two end channels provided with each top. Top is 1-3/4" thick.

PLASTIC LAMINATE
Top surface and edges are covered in attractive "White Leather" plastic laminate, securely bonded to a high-density particle board core. A moisture resistant backer sheet is bonded to the underside to deter warping. Top is 1-5/8" thick.

TUFF TOP
An extremely hard resin board surface bonded to a composition core with hardboard rails. Radiused top front edge for comfort. Resists penetration by many industrial fluids, and can be refinished. 1-3/4" thick.

LAMINATED MAPLE HARDWOOD
Thoroughly seasoned, kiln dried northern hardwood maple provides an extremely durable, attractive and long lasting top surface. 1-3/4" thick.

OPEN WORK BENCHES:This is the classic work station. A rugged platform for work of all types. Standard units include a top, legs and stringer. Each model can be ordered with your choice from 4 types of top materials. The bench can be accessorized with drawers, electrical outlet strips, back & end stops, risers and a lower shelf.

Open work bench units are available with either fixed or adjustable height legs. Both leg types are punched for tops, stringers, shelves and floor anchoring. Fixed height legs are designed for overall surface height of approximately 30" or 34". Adjustable height legs offer work surfaces from approximately 30" to 36" high, adjustable on 1" centers, plus knockouts for standard electrical outlets.

WORK BENCH ACCESSORIES

All Penco work benches can be ordered by their various component parts, as well as complete units. You can customize benches to fit your application with the following accessories. Standard finish for all steel parts is 028 Gray baked enamel.

BACK AND END STOPS: A 3" high barrier with rounded front corners. Hardware included for installation on steel top. Hardware for mounting to plastic laminate, wood or composition tops requires a Mounting Kit.

RISER: Provides a 12" high x 10" deep shelf above the work surface. Hardware for mounting to plastic laminate, wood or composition tops requires Mounting Kit.

SHELF: Full width 11-3/16" deep shelf fastens to legs for convenient storage. Hardware included.

STRINGER: Required for lateral stability; also serves as a backstop for lower shelf. Hardware included.

CABINET PEDESTAL: A welded 15-3/4"W x 20"D x 27"H cabinet with one adjustable shelf. Locking handle with 2 keys. Cabinet may be inverted for left or right hand door opening. May be used in common between tops. For fastening to steel top, order mounting channels.

ELECTRICAL OUTLET STRIP: A convenient way to route power to the work area. Finished in light gray only. Outlets are 15A, 125V on 12" centers. For grounded 3-prong plugs (mounting hardware not included).

CASE AND DRAWER: 20" Deep (Long) x 6-3/4" high. For hanging beneath tops or stacking to support a modular work bench. Includes a sliding tray. Drawer moves on nylon rollers and can be locked with built-in locks or padlocks (ordered separately). Hardware for stacking included. For fastening to steel work bench top, order mounting channels.

CABINET BASE: 15-3/4"W x 20"D Supports either Cabinet Pedestals or four (4) Case and Drawer units when used in modular work benches. Welded construction, closed on 4 sides.

BENCH LEGS

FIXED HEIGHT BENCH LEG: All welded, exceptionally strong. Flared foot distributes load evenly.

ADJUSTABLE HEIGHT BENCH LEG: Welded leg assembly which allows installation of top at height from approximately 30" to 36" in 1" increments. Has knockouts for the installation of standard electrical outlets. Penco bench legs can be used as common legs between benches.

WORK BENCH TOPS

STEEL TOP: Heavy gauge steel with no holes on work surface. Withstands hard shop use for years. Will not crack, splinter, gouge or absorb oil. Two end channels provided with each top. Top is 1-3/4" thick.

PLASTIC LAMINATE: Top surface and edges are covered in attractive "White Leather" plastic laminate, securely bonded to a high-density particle board core. A moisture resistant backer sheet is bonded to the underside to deter warping. Top is 1-5/8" thick.

TUFF TOP: An extremely hard resin board surface bonded to a composition core with hardboard rails. Radiused top front edge for comfort. Resists penetration by many industrial fluids, and can be refinished. 1-3/4" thick.

LAMINATED MAPLE HARDWOOD: Thoroughly seasoned, kiln dried northern hardwood maple provides an extremely durable, attractive and long lasting top surface. 1-3/4" thick.

SERVICE CARTS

Heavy duty 32" high steel service cart for the efficient movement of materials, tools, mail or stocks through a plant or office. Two sizes are available: 16"W x 30"D x 32"H and 24"W x 36"W x 32"H.

The steel trays are 3" deep with smooth formed edges. The top tray can be turned upside down for a flush surface. The handle can be secured at either end. Two rigid and two swivel 5" casters are standard. As an option, a center tray may be added. For secure storage, Penco Case and Drawer Units can be ordered with carts, to hang beneath the trays, per the table at right. The 36" deep units can accept 15-3/4" wide drawers mounted side by side as well as vertically.

STOOLS

Penco all-purpose stools are designed to fit almost every job requirement. They are available in two height ranges, and can be outfitted with an adjustable backrest. Both sizes (18" to 26" & 24" to 32") offer 8" height adjustment on 1" centers with easy lock-screw adjustment on the telescoping lower legs. All stools have swiveled plated steel glides which distribute weight evenly. The legs are constructed with heavy gauge steel tubing. They are welded to the underside of the one piece seat, and to the ring brace for strength. For added comfort, optional gray leatherette slip-on cushions are available for covering the backrest and the seat. Gray enamel only. Sold in full carton quantity.

You will need Adobe Acrobat Reader to read these files. This program is Free and can be downloaded from www.adobe.com or by clicking here.

 Mounting Drawer to Bench - 241.82 kB
Penco Products, Inc. | 1820 Stonehenge Drive | Greenville, NC 27858
800.562.1000
Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities.