Patriot® Duty Lockers

Patriot Duty Lockers are built for law enforcement applications, the big story behind the Duty locker is actually under it. A 14-gauge welded shell, 16-gauge drawer and ball bearing glides provide at no less than 3.4 cubic feet of usable storage in the Patriot Duty Locker’s drawer base. The 33” deep drawer base allows you to use a standard 9.5" deep wood bench for seating, individual or continuous lengths hardwood can be used.

Distinguishing Features

  • 16-gauge Interior Divider and Side Shelf
  • Ventilation slots on Locker Top
  • Hat Shelf Ventilated on Garment Side
  • Heavy Duty Coat Rod and Hooks on Garment Side
  • Lockable Security Compartment
  • Duplex knockout on locker top
  • 24 inch deep Locker with 21 inch deep accessories
  • 60 inch and 72 inch heights available
  • Available with or without the drawer base
  • 1132
  • 1135
  • Patriot® Duty Lockers
  • Patriot® Duty Lockers
  • Patriot® Duty Lockers
  • Patriot® Duty Lockers

Penco's Patriot Duty Lockers answer the call with law enforcement and security professionals in mind. A fully-equipped interior featuring preconfigured compartments and additional private storage means what you need is where you need it, when you need it.

  • Construction – Welded or KD
  • Heights Available – 60 or 72”
  • Widths Available – 18 or 24”
  • Ventilation – Perforated Top, Hat Shelf. Louvered Doors and Drawer
  • Lockable Compartments – Main doors, drawer and interior side compartment
  • Hanging – Heavy Duty Coat Rod and Hanging Hooks
  • Latching – Cremone Handle
  • Electrical Access – Single Gang Duplex Knockout In Top Panel
  • Colors – Available in many powder coat finishes, 2-tone no extra charge

Duty Locker Knocked Down Build

Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points.

Locker Body: Sides, Bottoms, Tops, and Shelves: 16 gauge steel. Sides punched for shelf locations on nominal 12 inch centers.

Backs: One piece, solid 18 gauge steel.

Face Frames: 16 gauge, formed in a channel shape with continuous vertical door strike.

Doors: One piece 14 gauge sheet steel. Standard Ventilation: 6 inch (152.4 mm) wide by 3/4 inch (19 mm) high horizontal louvers arranged in two groups of six.

Optional Ventilation: 3/4 inch (19 mm) wide by 1-1/2 inch (38 mm) high diamond-shaped perforations or 3/4 inch (19 mm) wide by 1/4 inch (6.4 mm) high security mini louvers. Solid doors.

Hinges: Continuous type: 16 gauge piano hinge measuring full height of door. Welded to door and attached to locker frame using steel rivets.

Sides: 16 gauge sheet steel, solid.

Tops and Bottoms: Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member. Tops accept a single gang duplex receptacle and are ventilated with a pattern of 1x1/8” slots.

Shelves: Flanged four sides with additional return flange on front edge to increase strength.

Assembly Hardware: Zinc plated truss fin head bolts and hex nuts. Hole spacing in locker body construction: Not exceeding 9 inches (225 mm). Optional factory assembly of locker bodies using rivets.

Drawer Base: Fully-welded 14 gauge case with 16 gauge welded drawer insert with sides lanced to accept vertical dividers and supported by ball bearing glides. Adds 18 inches to locker height when so equipped. Drawer is 33 inches deep.

DOOR HANDLES AND LATCHING

Cremone Latching: Handle shall be a heavy duty turn handle that secures the door at three points. The top and bottom frames are engaged with 3/8 inch (9.5 mm) steel rods, and a 1/8 inch (3 mm) thick center latch engages at the side.

>p>Double door configurations shall consist of a left hinged door secured its full length by the right hinged door when latched.

Handle Assembly shall be secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary. Welded handle assemblies shall not be accepted.

Single Point Latch: Single door models only. Recessed handle with integrated pull and 11 gauge steel hasp welded to locker frame.

Multiple Point Latch: Single door models only. Recess finger-lift control handle in door, positive automatic type latching, whereby locker may be locked when open, then closed without unlocking.

INTERIOR EQUIPMENT

Shelf: 16 gauge full width, located approximately 12 inches (304.8 mm) below top of locker and perforated to promote movement of air.

Hooks and Coat Rod: Two heavy duty 3” high, 7/8” wide 2-1/2 inch deep single-prong wall hooks and one heavy duty chrome plated 1 inch diameter coat rod.

Interior Divider: 16 gauge, with lockable compartment and additional side shelf.

FABRICATION

Fabricate lockers square, rigid, without warp, with metal faces flat and free of distortion.

Finish: Finish coat shall be electrostatically applied powder coat enamel properly cured to paint manufacturer specifications to achieve optimum performance. All lockers shall be painted inside and outside with the same color.

Powder Coat: Dry thickness of 1 to 1.2 mils (0.025 to 0.03 mm). Color: As selected from manufacturer’s standard colors.

Duty Locker Welded Build

Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points.

Locker Body: Sides, Bottoms, Tops, and Shelves: 16 gauge steel. Sides punched for shelf locations on nominal 12 inch centers

Backs: One piece, solid 18 gauge steel.

Face Frames: 16 gauge, formed in a channel shape with continuous vertical door strikes and integral with locker side.

Doors: One piece 14 gauge sheet steel. Standard Ventilation: 6 inch (152.4 mm) wide by 3/4 inch (19 mm) high horizontal louvers arranged in two groups of six.

Optional Ventilation: 3/4 inch (19 mm) wide by 1-1/2 inch (38 mm) high diamond-shaped perforations or 3/4 inch (19 mm) wide by 1/4 inch (6.4 mm) high security mini louvers. Solid doors.

Hinges: Continuous type: 16 gauge piano hinge measuring full height of door. Welded to door and attached to locker frame using steel rivets.

Sides: 16 gauge sheet steel, solid.

Tops: Notched and formed sheet; one continuous flat top for each locker. Tops accept a single gang duplex receptacle and are ventilated with a pattern of 1x1/8” slots.

Channel Base: Notched and formed sheet; one continuous bottom for each locker, suitable for anchoring to wood or concrete bases. Adds 4 inches to locker height when so equipped.

Shelves: Flanged four sides with additional return flange on front edge to increase strength.

Drawer base: Fully welded 14 gauge case with 16 gauge welded drawer insert with sides lanced to accept vertical dividers and supported by ball bearing glides. Adds 18 inches to locker height when so equipped. Drawer is 33 inches deep.

DOOR HANDLES AND LATCHING

Cremone Latching: Handle shall be a heavy duty turn handle that secures the door at three points. The top and bottom frames are engaged with 3/8 inch (9.5 mm) steel rods, and a 1/8 inch (3 mm) thick center latch engages at the side.

Double door configurations shall consist of a left hinged door secured its full length by the right hinged door when latched.

Handle Assembly shall be secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary. Welded handle assemblies shall not be accepted.

Single Point Latch: Single door models only. Recessed handle with integral pull and 11 gauge steel hasp welded to locker frame.

Multiple Point Latch: Single door models only. Recess finger-lift control handle in door, positive automatic type latching, whereby locker may be locked when open, then closed without unlocking.

INTERIOR EQUIPMENT

Shelf: 16 gauge full width, located approximately 12 inches (304.8 mm) below top of locker and perforated to promote movement of air.

Hooks and coat rod: Two heavy duty 3” high, 7/8” wide 2-1/2 inch deep single-prong wall hooks and one heavy duty chrome plated 1 inch diameter coat rod.

Interior Divider: 16 gauge, with lockable compartment and additional side shelf.

FABRICATION

Fabricate lockers square, rigid, without warp, with metal faces flat and free of distortion.

Finish: Finish coat shall be electrostatically applied powder coat enamel properly cured to paint manufacturer specifications to achieve optimum performance. All lockers shall be painted inside and outside with the same color.

Powder Coat: Dry Thickness of 1 to 1.2 mils (0.025 to 0.03 mm).

Color: As selected from manufacturer’s standard colors.

Color NumberColor NameColor
054Canvas
021Gray Ash
028Gray
073Champagne
723Light Putty
012Tawny Tan
701Spray Green
952Turquoise Teal
055Shamrock
812Hunter Green
715Lake Blue
823Slate Blue
806Marine Blue
052Reflex Blue
822Regal Blue
058Nordic Purple
056Sunburst
710Sagebrush Yellow
720Mandarin Orange
722Patriot Red
767Cardinal Red
736Burgundy
848January White
949Jet Black

NOTE: Colors shown are as close to actual finishes as the printing process allows. Do not make your final color selection based on the color shade shown on this page. Penco Color Charts are available for a more accurate color match. Exposure to high humidity, chlorine salts, abrasive cleaners, germicidal cleaners and acids can damage the finish and will void the guarantee. For outdoor applications or other harsh environmental conditions, contact your Penco Representative.

Configurator

View Our Configurator

Our configurator allows you to find a Penco product to meet your specific needs.

Start Now
Our Location
Our Location

Penco Products, Inc.
1820 Stonehenge Drive,
Greenville NC 27858

Contact Us
Contact Us

Phone: 800-562-1000
Fax: 800-248-1555

Log In
Log In

Please log into Penco
to gain access to images,
price lists & more