Patriot® Turnout Lockers

Patriot Turnout offers optimum ventilation for uniforms and outerwear with a minimum of lockable personal storage. All models are equipped with a sturdy full width shelf located 12” below the top to provide ample storage for protective head gear. A chrome plated 1 inch dia. coat rod and heavy-duty coat hooks ensure exceptional hanging capacity below.

Distinguishing Features:

  • All sizes are offered in welded or knocked down construction
  • Integral channel base is standard on welded models.
  • Factory assembly available on KD models
  • Open front and hemmed frame
  • 24 inch deep locker available in 24, 30, 36, 42 or 48 inch widths
  • 18 inch deep locker available up to 36 inches wide
  • Number plates mount to the shelf face for easy visibility
  • Sides are pre-punched on 12 inch vertical centers to accept additional shelves

Please Note: Patriot accessories are designed for attachment on site during locker assembly and installation. On welded Patriot models, only the hat shelf will be factory installed. This is done to optimize paint coverage and facilitate interior configuration changes if needed.

  • 1135
  • 1132
  • Patriot® Turnout Lockers
  • Patriot® Turnout Lockers
  • Patriot® Turnout Lockers
  • Patriot® Turnout Lockers

In response to the needs of first responders everywhere for heavy duty, purpose-built storage, we are proud to offer a special line of gear and turnout lockers designed with the unique demands of armed forces personnel and emergency response professionals in mind.

Patriot Turnout Lockers are a mission-specific group of tactical locker products with a load of upgraded accessories. They are designed to serve and designed to last. Patriot Lockers start with heavy gauge, cold rolled steel and are painted using a durable yet attractive powder coat finish. Working from that solid foundation, we’ve designed premium knocked down and fully welded 24”, 30”, 36”, 42” and 48” wide lockers and a list of accessories that allow the locker to be fitted out for any kind of duty.

  • Construction – Welded or KD
  • Heights Available – 72” Welded Models Are 76” With Integral Base
  • Widths Available – 24, 30, 36, 42 or 48”
  • Ventilation – Open Front. Diamond Perforated Sides
  • Lockable Compartments – Optional security box, drawer or footlocker
  • Hanging – Heavy Duty Coat Rod and Hanging Hooks
  • Latching – Open Front

Patriot® Turnout Locker - 18" and 24" Deep

Size

KD (Knocked Down) Construction

All-Welded  Construction

With 15" Deep Shelf

Width

Depth

Height

Cat. No.

Height

Cat. No.

18"

18"

72"

6KTDA84

76"

6WTDA84C

24"

18"

72"

6KTDA04

76"

6WTDA04C

30"

18"

72"

6KTDA14

76"

6WTDA14C

36"

18"

72"

6KTDA24

76"

6WTDA24C

24"

24"

72"

6KTDA00

76"

6WTDA00C

30"

24"

72"

6KTDA10

76"

6WTDA10C

36"

24"

72"

6KTDA20

76"

6WTDA20C

42"

24"

72"

6KTDA30

76"

6WTDA30C

48"

24"

72"

6KTDA40

76"

6WTDA40C

With 21" Deep Shelf

Width

Depth

Height

Cat. No.

Height

Cat. No.

18"

24"

72"

6KTDA82

76"

6WTDA82C

24"

24"

72"

6KTDA02

76"

6WTDA02C

30"

24"

72"

6KTDA12

76"

6WTDA12C

36"

24"

72"

6KTDA22

76"

6WTDA22C

42"

24"

72"

6KTDA32

76"

6WTDA32C

48"

24"

72"

6KTDA42

76"

6WTDA42C

Gear and Turnout Knocked Down Build

Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points.

Locker Body:  Sides, Bottoms, Tops, and Shelves: 16 gauge steel.

Sides punched for shelf locations on nominal 12 inch centers.

Backs:  Solid 18 gauge steel.

Sides:  16 gauge sheet steel with 3/4 inch (19mm) wide by 1-1/2 inch (38mm) high diamond-shaped perforations. Optional: solid sides without ventilation. Tops and Bottoms: Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member. Shelves: Flanged on four sides formed to 90 degrees, front edge having a second bend.

Frame: Vertical frame member to be not less than 16 gauge formed to a channel shape and hemmed to create a smooth interior edge. Intermembering parts to be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting strains. Hole spacing in locker body construction: Not exceeding 9 inches (225 mm).

Assembly Hardware: Zinc plated truss fin head bolts and hex nuts. Optional factory assembly of locker bodies using rivets.

Interior Equipment

Shelf: 16 gauge full width located approximately 12 inches (304.8 mm) below top of locker.

Hooks and Coat Rod: Two heavy duty 3 inch high, 7/8 inch wide 2-1/2 inch deep single-prong wall hooks and one chrome plated 1 inch diameter coat rod.

Fabrication

Fabricate lockers square, rigid, without warp, with metal faces flat and free of distortion.

Knocked Down Lockers: Fabricate lockers on the unit principle, each locker with individual face frame, individual top, bottom, back, and shelves, with two sides forming one complete unit.  Verify dimensions and arrangement before fabrication. Finish:  Finish coat shall be electrostatically applied powder coat enamel properly cured to paint manufacturer specifications to achieve optimum performance. All lockers shall be painted inside and outside with the same color.

Powder Coat: Dry thickness: 1 to 1.2 mils (0.025 to 0.03 mm).

Color:  As selected from manufacturer’s standard colors.

Gear Lockers – Same as above with the following substitutions and additions:

Doors: One piece 14 gauge sheet steel. Standard ventilation:  6 inch (152.4 mm) wide by 3/4 inch (19 mm) high horizontal louvers arranged two groups of six.

Optional ventilation: 3/4 inch (19mm) wide by 1-1/2 inch (38 mm) high diamond-shaped perforations or 3/4 inch (19 mm) by 1/4 inch (6.4 mm) high security mini louvers. Solid doors. Door Frames: 16 gauge formed in a channel shape with continuous vertical door strikes.

Hinges: Continuous type: 16 gauge piano hinge measuring full height of door. Welded to door and attached to locker frame using steel rivets.

Door Handles and Latching

Cremone Latching: Handle shall be a heavy duty turn handle that secures the door at three points. The top and bottom frames are engaged with 3/8 inch (9.5 mm) steel rods, and a 1/8 inch (3 mm) thick center latch engages at the side. Double door configurations shall consist of a left-hinged door secured its full length by the right hinged door when latched.

Handle assembly shall be secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary. Welded handle assemblies shall not be accepted.

Single Point Latch: 24” wide single door only. Recessed handle with integral pull and 11 gauge steel hasp welded to locker frame.

Multiple Point Latch: 24” wide single door only. Recess finger-lift control handle in door, positive automatic type latching, whereby locker may be locked when open, then closed without unlocking.

Gear and Turnout Welded Build

Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points.

Locker Body: Sides, Bottoms, Tops, and Shelves: 16 gauge steel. Sides punched for shelf locations on nominal 12 inch centers.

Backs: Solid 18 gauge steel.

Groups to 48 inches (1.219 m) wide:  One piece back.

Groups over 48 inches (1.219 m) wide:  Two piece back.

Frame: 16 gauge formed in a channel shape with hemmed edge.

Sides: 16 gauge sheet steel with 3/4 inch (19mm) wide by 1-1/2 inch (38mm) high diamond-shaped perforations. Optional:  solid sides without ventilation. Tops: Notched and formed sheet; one continuous flat top for each group of lockers.

Channel Base: Notched and formed sheet; one continuous bottom for each group of lockers, suitable for anchoring to wood or concrete bases. Adds 4 inches to the overall height of locker. Shelves: Flanged four sides with additional return flange on front edge to increase strength.

Interior Equipment

Shelf:  16 gauge full width, located approximately 12 inches (304.8 mm) below top of locker.

Hooks and Coat Rod: Two heavy duty 3” high, 7/8” wide 2-1/2 inch deep single-prong wall hooks and one heavy duty chrome plated 1 inch diameter coat rod.

Fabrication

Fabricate lockers square, rigid, without warp, with metal faces flat and free of distortion.

Finish: Finish coat shall be electrostatically applied powder coat enamel properly cured to paint manufacturer specifications to achieve optimum performance. All lockers shall be painted inside and outside with the same color.

Powder Coat: Dry thickness of 1 to 1.2 mils (0.025 to 0.03 mm). 

Color: As selected from manufacturer’s standard colors.

Gear Lockers – Same as above with the following substitutions and additions:

Doors: One piece 14 gauge sheet steel. Standard ventilation: 6 inch (152.4 mm) wide by 3/4 inch (19 mm) high horizontal louvers arranged in two groups of six.

Optional ventilation: 3/4 inch (19mm) wide by 1-1/2 inch (38 mm) high diamond-shaped perforations or 3/4 inch (19 mm) wide by 1/4 inch (6.4 mm) high security mini louvers. Solid doors. Door Frames: 16 gauge formed in a channel shape with continuous vertical door strikes.

Hinges: Continuous type:  16 gauge piano hinge measuring full height of door. Welded to door and attached to locker frame using steel rivets.

Door Handles and Latching

Cremone Latching: Handle shall be a heavy duty turn handle that secures the door at three points. The top and bottom frames are engaged with 3/8 inch (9.5 mm) steel rods, and a 1/8 inch (3 mm) thick center latch engages at the side. Double door configurations shall consist of a left hinged door secured its full length by the right hinged door when latched.

Handle Assembly shall be secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary. Welded handle assemblies shall not be accepted.

Single Point Latch: 24 inch wide single door only. Recessed handle with integral pull and 11 gauge steel hasp welded to locker frame. 

Multiple Point Latch: 24 inch wide single door only. Recess finger-lift control handle in door, positive automatic type latching, whereby locker may be locked when open, then closed without unlocking.

Color NumberColor NameColor
054Canvas
021Gray Ash
028Gray
073Champagne
723Light Putty
012Tawny Tan
701Spray Green
952Turquoise Teal
055Shamrock
812Hunter Green
715Lake Blue
823Slate Blue
806Marine Blue
052Reflex Blue
822Regal Blue
058Nordic Purple
056Sunburst
710Sagebrush Yellow
720Mandarin Orange
722Patriot Red
767Cardinal Red
736Burgundy
848January White
949Jet Black

NOTE: Colors shown are as close to actual finishes as the printing process allows. Do not make your final color selection based on the color shade shown on this page. Penco Color Charts are available for a more accurate color match. Exposure to high humidity, chlorine salts, abrasive cleaners, germicidal cleaners and acids can damage the finish and will void the guarantee. For outdoor applications or other harsh environmental conditions, contact your Penco Representative.

Configurator

View Our Configurator

Our configurator allows you to find a Penco product to meet your specific needs.

Start Now
Our Location
Our Location

Penco Products, Inc.
1820 Stonehenge Drive,
Greenville NC 27858

Contact Us
Contact Us

Phone: 800-562-1000
Fax: 800-248-1555

Log In
Log In

Please log into Penco
to gain access to images,
price lists & more